Steam Traps

Contact Me

Water separator

Product introduction

Separators with all sizes are fitted with support brackets which can be used to minimize piping loads. To ensure that any separated liquid is drained quickly. suitable liquid drainer/ steam trap must be connected Io the drain port.

Send Inquiry


Specification
S7 Water Separator, Material: Carbon Steel. Size: DN65To DN150
The S7 baffle typo separator used for the removal of entrained  liquids in steam, compressed air and gas systems. It is available in carbon steel ma to rial.
We recommend fitting of insulation jacket to improve the performance of the separator. Sizes and pipe connections DN65/80/100/125-150
BS 4504 Flanged PN 16 or PN40 with screwed BSP drain and air vent
BS 1560 Flanged Class 150 or Class 300 with screwed BSP drain and air vent Installation
The S7 baffle type separator is Installed in a horizontal pipeline with the drain straight down.

Installation
Separators with all sizes are fitted with support brackets which can be used to minimize piping loads. To ensure that any separated liquid is drained quickly. suitable liquid drainer/ steam trap must be connected Io the drain port.
When separators are applied in the steam with air, air might be gathered in the upper portion of the separator. In this situation the protection plug in the air vent port shall be removed and a suitable air valve should be connected to it. If not, the protection plug in the air vent port shall be installed and the air vent port shall be installed with a Class 300fDcaroon steel plug.

Feedback

Welcome to our website. If you have any requests or suggestions,please feel free to email us at lonz@lonzvalve.com or use the following enquiry form. Please allow us to provide you with the best service.

Welcome to our website. If you have any requests or suggestions,please feel free to email us at lonz@lonzvalve.com or use the following enquiry form. Please allow us to provide you with the best service.